How to build a Spiral Staircase

This shows you how to make a Spiral Staircase. This helps when you need to save space in your base. It can also be disguised as a wall. Also this is the first Scrap mechanic guide on steam so yay.

Required Items

• Stone, Wood, Metal, Barrier, Tile or Brick
• Bearing
• Switch
• Controller
• Staircase Step (other blocks can be used to hide it into a wall)
• Also the Lift and Connection Tool

Building The Staircase

First place a Block and a Staircase Step

Secondly place a Bearing on top of the Block

Place a Block on top of the bearing and attach the Staircase Step to the Block you just placed

Redo step 2 and 3 until you build it to the height you want, you made need to stand on the lift to get higher.

Setting The Angles

First you need to connect the controller to the bearings

Also connect the switch*

*USE THESE SETTING IF USEING A SWITCH*

*IF NOT USING A SWITCH USE THESE SETTINGS*

It should look like this if you flip the switch or the default position if you dont use a switch

Also you can change the height you will just need more controllers