A guide to Vertical Climbing!

Make a basic foundation for the build.

-Place an 8x2 rectangle made out of metal ontop of the lift.

-Place a driver s seat in the middle, and 2 engines on the remaining sides,

-Place a Pipe Corner next to the engine facing upwards.

-Place a Pipe Long ontop of te Pipe Corner.

-Repeat this on all 4 sides.

-Place a Pipe Join on top of the Pipe Long

-Make sure the Pipe Join is facing up and outwards.

-Repeat this on all 4 sides.

-Place a Pipe Corner facing down on the Pipe Join.

-Repeat this on all 4 sides.

-Place a Bearing on the front 2 Pipe Corners. This will become your steering.

-Place a Pipe Short on the Pipe Corners.

-Repeat this on all 4 sides.

-Place a regular Suspension on the Pipe Short.

-Repeat this on all 4 sides.

-Place a Pipe Corner facing outwards underneath the Suspension.

-Place a Bearing on the Pipe Corner.

-Repeat this on all 4 sides.

-Place Big Wheels on the Bearings.

-Repeat this on all sides.

-Place a total of 4 Thrusters on top of the vehicle.

-Place 2 Thrusters on the back on the engine

-Place a Button on both sides of the vehicle.

MAKE SURE IT'S ON BOTH SIDES!

-Get your connector tool and connect Bearings of the wheels to the engines.

-Connect the Bearings of the front steering to the driver s seat.

-Connect the engines to the driver s seat.

-Connect 1 button to all 4 upwards Thrusters.

-Connect the other button to both of the Backwards Thrusters.

-Connect both of the buttons to the driver s seat.

-Put both engine speeds to the middle.

You can now enjoy your vehicle!

Assuming you followed the tutorial perfectly, this is how you have to drive:

-Press 1 to make your vehicle stick to the surface it's on.

-Press 2 when it becomes hard to thrust up. Usually the wheels don't have enough power to drive vertically, so the jets at the back solve that.

It takes a little getting used to, but it can climb most objects in the map!


Thank you for following my Tutorial! It means a lot to me.

~Makku :D